Danmar Products 9822 Hard Shell Helmet with Face Guard

When you need full coverage this model offers the best features. A clear, polycarbonate face guard is attached to a lightweight helmet, which is made from shock-absorbent foam inside a hard, ventilated, plastic shell. The foam is coated in vinyl, so it’s easy to clean using just soap and water. It has an eye level opening (1"X 6") for unobstructed vision and a mouth opening (1"x 3 3/4") for maximum ventilation. The bottom edge is lined with a strip of soft foam. We feature a wide range of custom options, which we are happy to discuss with you so that your individual needs are met. Comes with an easily adjustable snap-closure chinstrap. Standard foam colors are Casa Tan, Pink, Royal Blue, and Black. Outer hard shell comes standard in a creamy White EXCEPT when ordering Black; Black foam comes standard with a Black outer hard shell. Note: Black outer shell is NOT available in size XXL. If you need an extra-long face guard use item 9821 with a 3462 modification instead of a 9822.

Note: Custom foam colors and/or modifications to any product are an additional charge and require up to 7 days for fabrication. Custom and/or modified items are not returnable.

Product features: 

• Clear polycarbonate face guard is attached to the lightweight helmet
• Foam is coated in vinyl, so it's easy to clean with just soap and water
• Helmet is made with shock-absorbent foam inside a hard, ventilated plastic shell
• Entire face guard can be pivoted to the top of the helmet for the convenience of the user
• Eye level opening offers unobstructed vision and a mouth opening gives maximum ventilation

Note: Custom foam colors and/or modifications to any product are an additional charge and require up to 7 days for fabrication. Custom and/or modified items are not returnable.

ONLY IN STOCK ITEMS ARE AVAILABLE FOR SAME DAY SHIPPING. XXS, XS, XL, AND XXL ARE NOT STOCK ITEMS. PINK IS NOT A STOCK COLOR IN ALL SIZES.

Face Guard Modifications
Basic face guard may be ordered without standard mouth and eye openings. As an example, ventilation holes could be used in place of the standard openings when the objective is to keep items out of the mouth or eye area. If ventilation holes are used in the eye area it should be noted that vision will be obstructed.

Stabilizing Side Tabs
Face guard is securely held in position by these attachments on each side of the helmet. Choose either permanent mount or pivot mount. The face guard remains positioned over the face and cannot be pivoted to the top of helmet if Permanent Mount is chosen. The Pivot Mount utilizes the quick release buckles to unsnap the face guard from the helmet enabling it to be pivoted up over the top of the shell.

Extra Long Face Guard Modification
A full one inch longer than the standard Face Guard, this modification also has larger eye and mouth openings too. Ther is an eye level opening of 7 in. x 2 in. for unobstructed vision and a mouth opening of 4.5 x 1.5 inches for maximum ventilation. This can be combined with 3461.

Rear Hard Shell Extension
In order to provide additional coverage at the back of the head, the polyethylene shell may be extended to cover the lower foam at the back of the helmet. Standard length of this attachment is three inches.

Foam Reinforcement
Reinforced vinyl material is bonded to our full helmet liner to prolong the life of the helmet. This strong material is especially good in situations when the helmet could be receiving particularly hard use.

Helmet Custom Strapping System
Ideal for those situations where there are attempts to remove the helmet at inappropriate times. Straps are attached to the bottom of the face guard and then cross comfortably under the chin, attaching to the back of the helmet with quick release buckles.

Reinforced Seams
Reinforced vinyl material is bonded into our foam liner seams, giving extra strength in these areas for situations where they receive exceptional stress.

Custom Colors

Extended Product Information:

• Faceguard Modification Chart