Multi-Fold Ramps

A wheelchair ramp is an inclined pathway designed to provide safe, accessible entry for people using wheelchairs, scooters, or other mobility aids, bridging height differences like steps or door thresholds without stairs. These ramps promote independence and reduce physical strain for caregivers by offering a smooth alternative to lifting or carrying. Portable, modular, or permanent options exist to fit homes, businesses, or vehicles, often made from durable materials like aluminum or treated wood with non-slip surfaces. Proper design ensures stability and ease of use, following guidelines like those from the ADA for public spaces. Always measure your space carefully and consider weight capacity to match user needs. Consult local accessibility experts or building codes for installation to avoid safety risks.

The proper slope for a wheelchair ramp follows a 1:12 ratio, meaning one inch of rise for every 12 inches of horizontal run, creating an 8.3% grade that's safe and manageable for most users. This standard, recommended by ADA guidelines, prevents excessive effort or tipping during ascent or descent. Steeper slopes like 1:8 may work for short rises under 3 inches in residential settings but increase fatigue—avoid them for longer ramps. Test the slope by ensuring a wheelchair user can navigate comfortably without assistance. Cross-slopes should stay under 1:48 to prevent drifting sideways. For precise calculations, use online ramp calculators or consult professionals to match your specific rise.

A wheelchair ramp should be at least 36 inches wide between handrails to allow comfortable passage for standard wheelchairs and space for an attendant if needed, per ADA standards. Wider ramps, like 48 inches or more, accommodate powered scooters or two-way traffic better, especially in high-use areas. Measure clear width excluding curbs or rails to ensure maneuverability around turns. Narrower ramps risk instability or collisions, so prioritize extra space for safety. Handrails, if present, add 1.5 inches per side but don't reduce usable width below 36 inches. Check local codes, as some require 42 inches for public ramps—always verify with a contractor for compliance.

A ramp wheelchair refers to a standard manual or power wheelchair optimized for navigating inclined ramps with proper weight distribution and large wheels for traction, unlike a step wheelchair designed for climbing stairs using track systems or stair-climbing mechanisms. Ramp wheelchairs prioritize smooth rolling on slopes up to 1:12, focusing on stability and battery life for powered models. Step wheelchairs excel in multi-level homes without ramps but may struggle on long inclines due to their climbing gear. Choose based on your primary environment—ramps favor everyday accessibility, while steps suit irregular terrain. Test both types with your healthcare provider to match mobility needs. Neither replaces professional fitting for posture and health support.

Rise and run define wheelchair ramp dimensions: rise is the vertical height to overcome (e.g., porch steps), and run is the horizontal distance the ramp covers. ADA recommends a 1:12 ratio—for every 1 inch rise, plan 12 inches run—to keep slopes gentle and safe. For a 24-inch rise, you'd need a 24-foot run. Landings every 30 feet provide rest areas. Measure accurately from ground to top landing, factoring in thresholds. Use calculators for exact specs, and consult pros for modular systems that adjust to your space.

Permits for wheelchair ramps depend on location, size, and permanence—most cities require one for attached or ground-supported ramps over a certain height, treating them as home extensions under building codes. Check with your local building department early; they'll review plans for slope, width, and materials to ensure safety and ADA compliance. Portable or temporary ramps under 30 inches often skip permits but confirm locally. Submit drawings, site photos, and specs; fees vary from $50-500. Skipping permits risks fines or removal—better safe for insurance too. Professionals handle paperwork, saving time and ensuring code approval.

Common wheelchair ramp design mistakes include slopes steeper than 1:12, causing fatigue or falls; widths under 36 inches, limiting navigation; and missing landings at tops, bottoms, or turns for resting. Slippery surfaces without texture lead to slips in wet weather, while unstable materials like untreated wood warp over time. Forgetting handrails on ramps over 6 feet or ignoring cross-slopes over 1:48 creates hazards. Poor drainage pools water, eroding bases. Always follow ADA guidelines, test usability, and hire certified installers. Regular inspections catch issues early for lasting safety.

For a 2-foot (24-inch) rise, a wheelchair ramp should be at least 24 feet long using the ADA 1:12 slope ratio—one foot run per inch rise—for safe, effortless navigation. Residential options allow 1:8 (16 feet) for occupied use but test for comfort first. Include 5x5-foot level landings at ends and handrails if over 30 inches high. Modular aluminum ramps assemble easily to this length without permits in many areas. Factor in turns needing 5-foot landings. Consult contractors for site-specific builds matching your budget and terrain.