Wheelchair Near Me
You may also like:
Strongback Mobility Excursion 8 Transport Wheelchair
Factory Direct Ships 2-3 Days! (Estimated) More info
You may also like:
Strongback Mobility Excursion 12 Transport Wheelchair
Factory Direct Ships 2-3 Days! (Estimated) More info
You may also like:
Strongback Mobility Excursion 12S+ Transport Wheelchair with Attendant Brakes
Factory Direct Ships 2-3 Days! (Estimated) More info
You may also like:
Strongback Mobility Excursion 12 Transport Wheelchair with Attendant Brakes
Factory Direct Ships 2-3 Days! (Estimated) More infoFrequently Asked Questions
Find answers to commonly asked questions below.
-
What Is A Wheelchair Ramp?
A wheelchair ramp is a sloped surface (made of aluminum, concrete, wood, or modular sections) that allows wheelchair users, scooter users, or people with walkers/canes to move between different elevations without stairs.
-
What Is The Proper Slope For A Wheelchair Ramp?
The ADA-recommended maximum slope is 1:12 (1 inch of rise per 12 inches of run, or about 4.8Ā¬ā). Residential ramps can be steeper (up to 2:12 or 3:12 in some cases) if space is limited, but 1:12 is safest and required for public/commercial access.
-
What Width Should A Wheelchair Ramp Be?
Minimum clear width is 36 inches (91 cm) per ADA standards. For two-way traffic or turning, 48-60 inches is recommended. Handrails (if present) cannot reduce the clear width below 36 inches between them.
-
What Is The Difference Between Ramp Wheelchair And Step Wheelchair?
There is no standard product called a step wheelchair. You may be thinking of (1) standard wheelchairs used on ramps vs. (2) specialized stair-climbing wheelchairs (e.g., models with tracks or powered stair-climbing mechanisms like the Scewo Bro, TopChair-S, or iBOT) that can negotiate stairs directly instead of needing a ramp.
-
What Is The Rise And Run For A Wheelchair Ramp?
Rise is the vertical height change; run is the horizontal distance. The ratio should be no steeper than 1:12 (example: 12-inch rise needs at least 12 feet of run). For every 1 inch of rise, you need 12 inches of run. Landings (flat areas) are required every 30 inches of rise or 30 feet of run.
